Quality System

We follow the Aerospace Quality System (AQS) with standard AS 9100D QMS requirements. We are NOT certified AS9100 Company but we follow the procedure.

We do the FAI per AS9102 standard using the standard format to compliance the Aerospace quality requirements.
The documents for the parts will as below

1. First Article report-Per AS9102 standard
2. Material  Chemical Composition  Certificate
3. Special Process test report (Chemical plating, Heat treatment, coating Etc.)
4. Certificate of Conformance (COC)
5. Mechanical dimensional check  Inspection report
6. 3D scanning and comparing the manufactured parts with OEM part-Report
7. Critical dimensions by third-party (CMM, Countour, etc)

Materials used for components

Below are the material Grade we used to make components for different Aerospace companies

1. 15-5PH AMS 5659, Steel Alloy Condition H103
2. AISI 17-7PH AMS 5529
3. Stainless steel, 316L
4. Stain less steel 301, AMS 5518, SS321, SS 304, SS410
5. Aluminum 6061 T6 condition/5052/
6. Polyimide, Nylon 66
7. Fluorocarbon, EPDM- Potable Grade
8. Silicon rubber, Flertex 378, Kydex.
9. Inconel 718 AMS 5663,

Different types of special process out sourced

Below are the Different special process we outsourced to make components for different Aerospace companies (NANDCAP) with COC for the supplier

1. Heat treatment of Stainless Steel (PH) To Cond. H1025 PER AMS 2759/3
2. Passivation of Stainless Steel per AMS 2700
3. Cadmium Plating Per  QQ-P-416, TYPE 1, CLASS 2-Yellow colour
4. Cadmium Plating Per QQ-P-416, TYPE 1, CLASS 1-Silver colour
5. Passivation per MIL--5541F
6. Anodize Black Per Mil-A-8625 TYPE II CLASS 2